pH Meter Price in Sri Lanka.

PH Meter Tester Water Wine Urine Monitor accuracy 0.01 automatic calibration ph 0-14 temp 0-60 ℃ For Laboratory, Aquarium, Pool water, etc.

 

pH Meter Features

Easy to Use: Simply immerse the pH meter electrode in the solution to be tested. As a result readings are quickly displayed on a large LCD

Wide Application: Ideal instrument for any aquarium, the fishing industry, swimming pools, spa, school laboratories, food & beverage, drinking water, and etc. Because the pH tester is small and easy to use.

Auto Calibrated: In-built calibration with buffer powders(included). Just press a button to finish the calibration. Factory calibrated this pH meter. As a result users can use it directly. Fast and Accurate Results: No need to work with those annoying color charts and test strips for instance.

Resolution: 0.01 pH and Accuracy: ±0.01 pH

Compact Portable Design: Pocket fitting pH tester that’s also lightweight and compact. For instance pH meter totally concealed fit in your bag or pocket for ease.

pH Meter Operation

1.Remove protective cap

2.First rinse the electrode with distilled water and suck it with filter paper.

3.Turn the meter on by pressing the “ON/OFF” key.

4.Immerse the pH tester electrode in the solution to be tested (should not be over the immersion line).

5.Stir gently and wait around 30 seconds till the reading stabilizes.

6.After finishing, clear the electrode with pure water, turn the meter off by pressing the “ON/OFF” key.

7.Always replace the protective cap after use.

Calibration

1.Turn on PH meter

2.Dissolve each buffer solution in 250ML of distilled water

3.Immerse the electrode into the PH 6.86 solution,(under the temperature of 25)

4.Press the “CAL”(calibration)button for 5 seconds and release

-Display will start flashing 6.86

-Wait until the display stops flashing.

Rinse the electrode with distilled water and dry it with filter paper.

5.Immerse the electrode in PH 4.00 solution,

-Press the “CAL” button for 5 seconds. Then press and release immediately the second time

-Reading will start flashing at 4.00

-Wait until the display stops flashing

Rinse and dry the electrode with distilled water as before.

6.Place the meter back to the buffer solution to test calibration. If incorrect, please repeat the calibration for instance.

7.If the approximate PH of your test solution is known to be above 7.0, calibrate the tester using 6.86 and 9.18 solutions.

Package Inclusions

1)One pH Meter

2)3 Bags Buffer Powder

3)Instruction Manual

4)Batteries

Kindly Reminder

Recalibrate, if the tester was used or lay aside a long time for instance.

If you open the battery case or replace the battery. Therefore Recalibrate it.

Don’t touch it with hand tools and fingers because the glass bulb of the electrode is fragile.

Suck the water on it gently when cleaning.

What is a pH meter? Check Wikipedia